electric porcelain
英 [ɪˈlektrɪk ˈpɔːsəlɪn]
美 [ɪˈlektrɪk ˈpɔːrsəlɪn]
绝缘瓷，电瓷
双语例句
- The development trend of electric porcelain was presented and the main reasons why the electric porcelain at home possessed poor properties compared with that of the foreign countries were discussed.
以高压绝缘电瓷材料的研究现状为基础，系统总结电瓷研究的成果，阐述了电瓷材料未来发展的趋势，分析了我国高压电瓷性能偏低的主要原因。 - Application Study of RTV-Coated Electric Porcelain Post Insulator in ± 800 kV UHV Converter Station
涂覆RTV的电瓷支柱绝缘子在±800kV特高压换流站的应用研究 - The series of ball mill is suitable for large architectural ceramic, sanitary porcelain, electric porcelain, metallurgy and chemical industry as milling wet grind materials equipment.
本系列球磨机主要用于大型建筑陶瓷、日用陶瓷、卫生陶瓷、电瓷、冶金、化工等行业作为湿法研磨物料用的一种大型球磨设备。 - The feasibility of firing high-strength aluminous electric porcelain in oxidizing atmosphere is proved by experiments, and the microstructure of porcelain is investigated by XRD and SEM.
通过实验，证明了氧化焰烧成铝质高强电瓷是可行的，并通过XRD、SEM等手段对电瓷的显微结构进行了分析。 - Approach the Diamond Grinding Wheel Balance Problem in Electric Porcelain Mechanical Grinding Processing
电瓷机械磨削中金刚石砂轮平衡问题探讨 - Study on the microstructure of alumina electric porcelain with high strength
高强度铝质电瓷材料显微结构的研究 - Effects of types of alumina materials and the amount of feldspar on crystalline shape of secondary mullite in high-strength aluminous electric porcelain have been discussed in this paper.
研究了铝氧原料种类及长石用量对铝质高强度电瓷中二次莫来石结晶形态的影响。 - The high-strength electric porcelain composite is researched and prepared by using mullite short fiber as reinforced material and aluminous electric porcelain as a matrix.
以普通矾土质陶瓷材料为基体，以莫来石短纤维为增强体，研究并制备了高强度复合电瓷材料。 - Study on Microstructure of High-Strength Aluminum Electric Porcelain Produced by Oxdizing Atmosphere
氧化焰烧成铝质高强度电瓷显微结构分析 - The paper deals with the fracture mechanism of high alumina electric porcelain.
本文研究了高铝氧电瓷材料的破坏机理。 - Effects of Dispersity and Structure of Alumina on Properties of Electric Porcelain
氧化铝的分散度和结构对电瓷性质的影响 - This paper explains chiefly the birth of light sources for the new generation promoted by the electronics for lamps, the electric sources of metal halide gas with porcelain bulb, as well as the electric light sources of discharge by a medium baffle and micro wave discharge.
本文主要阐述了灯用电子学促进了新一代光源的诞生，陶瓷外壳的金属卤化物气体放电光源，介质阻挡放电和微波放电光源。 - Acoustic emission rate has been measured during proof tests of electric porcelain, the attenuation law of AE rate at constant load has been inferred from fracture mechanics of ceramics.
检测了验收试验时电瓷的声发射计数率，根据陶瓷断裂力学推导了恒定负荷下声发射计数的衰减规律，这一规律被实验结果很好地证实。 - Study on High-strength Electric Porcelain Produced by Oxidizing Atmosphere
氧化焰烧成高强度电瓷材料的研究 - Landslide Analysis and Reinforcement of Soil Slope at Ningxiang Electric Porcelain Factory
宁乡胶木电瓷厂土体滑坡分析及治理 - Development trend of high tension electric porcelain
高压电瓷材料的发展趋势 - An analyse is made on the balance problem with diamond grinding wheel in electric porcelain mechanical grinding processing. It proved that the effect of centrifugal forces is the one of main causes for components abrasion and machine vibration.
对电瓷机械磨削中金刚石砂轮的平衡问题进行了分析，认为离心力的作用是造成零部件磨损、机器振动的主要原因之一。 - On relationship between micro structure and physical property of electric porcelain
电瓷显微结构与机械性能关系研究 - The article discusses the effect of ball milling sieve residue on bending strength of alumina high-strength electric porcelain, and points out that ball milling sieve residue should be controlled in accordance with the product characteristics and porcelain property requirements.
探讨了球磨筛余对铝质高强度电瓷瓷质弯曲强度的影响，指出了应根据产品的特点及瓷质性能要求，合理控制球磨筛余。 - Brown glaze for electric porcelain, which is firing in oxidizing atmosphere, is prepared by using lime-alkaline glaze as base glaze and Fe_2O_3, Cr_2O_3, MnO_2 as colorant.
以石灰-碱釉为基础釉，Fe2O3、Cr2O3、MnO2为着色剂，研制一种适合于氧化焰烧成电瓷的棕红色釉。 - The microstructure, the physical phase composition, and the mechanical characterization between structure of alumnae electric porcelain with high strength has been studied systematically by means of XRD, SEM, etc.
借助于XRD、SEM等手段，系统地研究了铝质高强度电瓷材料的显微结构、物相组成及性能与结构之间的差异特征。 - Theoretical analysis indicates that harmonic electric field method has higher sensitivity, and can effectively obtain the internal insulation detecting information of composite insulators and faults of porcelain insulators under certain resistance.
理论分析表明，该方法灵敏度较高，能有效地给出低于一定阻值的零值瓷绝缘子和合成绝缘子内绝缘导通性故障信息。 - As the insulator is an electric porcelain products by high-temperature sintering, if the formula is out the way in the production process and the raw material do not mix unevenly, those can form internal shortcoming so that toughness will drop.
由于绝缘子是高温烧结成的电瓷产品，如果在制作过程中配方不当，工艺流程中原料混合不均匀，均容易形成瓷件内部缺陷造成韧性降低。